by WP Developer | Jul 26, 2026 | Blog
If your furnace keeps shutting off before your home reaches the temperature you set, it is short cycling, and it is always a sign that something is wrong. A healthy furnace should run for 10 to 15 minutes per heating cycle. When a furnace turns on, runs for one or two...
by WP Developer | Jul 20, 2026 | Blog
A burning smell from your furnace is not always dangerous, but some odors require you to act immediately. The most common cause is harmless: dust burning off internal components when the furnace runs for the first time each season. This smell fades within 20 to 30...
by WP Developer | Jul 7, 2026 | Blog
If your gas furnace is not igniting, the first thing to do is check for a gas smell. If you detect a rotten egg or sulfur odor, leave your home immediately, call 911 from outside, and do not return until emergency responders clear it. If there is no gas smell, run...
by WP Developer | Apr 27, 2026 | Blog
A furnace blowing cold air is almost always one of seven things: the fan is set to “on” instead of “auto,” the filter is clogged, the pilot light or flame sensor has failed, the heat exchanger has overheated and tripped a safety limit,...
by WP Developer | Apr 24, 2026 | Blog
Before calling for service, check five things: your thermostat settings, the air filter, the circuit breaker, the furnace power switch, and the pilot light or ignitor. At least half of all “no heat” calls resolve at one of these steps. Oklahoma winters are...
by WP Developer | Apr 20, 2026 | Blog
A pilot light that won’t stay lit almost always points to a faulty thermocouple. In most cases, that’s a repair, not a replacement. But the right answer depends on your furnace’s age, the frequency of the problem, and what else the diagnostic turns...
